Outdoor Furniture & Products - Lamb's Custom Woodworking

Cedar Porch Swing is made from 5/4″ thick Western Red Cedar. 5′ wide, its over 4′ wide between the arms, There is room to spare for 2 adults. The contoured seat is 18 1/2″ deep and the back is tilted back slightly providing a comfortable and relaxing position.

Made with Western Red Cedar, assembled using stainless steel screws and waterproof glue. This was finished with a penetrating epoxy and Epifanes, which is a marine grade coating. Chain and ceiling mounting hardware not included. Stainless steel eyebolts attached to the swing for the chain to go through are included.

Pricing

$390 in natural finish

$100 additional for Marine varnish finish

Cedar Porch Swing Read More »

Cedar Tables

Western Red Cedar table handcrafted in Bridgton Maine. the legs are constructed using mortise and tenon joinery, and waterproof glue, This cedar table makes a great addition next to your Adirondack chair or between two chairs. Perfect for setting your beverage of choice on or a speaker for playing you favorite music while you relax. Approximately 13″ x 18″ and 21″ tall

Pricing

Cedar – $50

Anglique – $80

Cedar Table Read More »

Planters

Western Red Cedar planter box. Made from 5/4″ thick boards, so the actual thickness is 1″ not 3/4″. The planter is 40″ tall, making it about waist high. Inside dimensions are 45 1/2″ long, 15 1/2″ wide, 6 1/2″ deep. This was designed so adding a shelf to the bottom is easy. You can add your own or I can add a cedar shelf for an additional $35. Can be customized to any size you want up to 6′ long. Price for a 6′ planter without a shelf is $225.

Decorative corners are added to protect you from sharp corners, increase strength and make the box more appealing

Looking inside you will see the bottom has a small space between the boards for drainage. The tops of the alignment/support blocks are angled so if you hit it with your trowel the trowel will just deflect off and not dig in. The legs are positioned underneath the rails for additional support. The legs are secured with waterproof glue and stainless steel screws. Additional slats going across the bottom increase strength even more There is plenty of support for whatever you put in it.

Pricing

3′ long – $150

4′ long – $175

5′ or 6′ long – $225

Shelf for bottom – $35

Planter Box Read More »

These Adirondack chairs are handcrafted in Bridgton Maine using Western Red Cedar or Angelique wood. The curved back and contoured seat make them incredibly comfortable, and they are at a height that’s easy to get in and out of. All boards are sanded before assembly, providing a clean and smooth product ready for your finish. Joints are glued and screwed together. Screws are counter sunk and plugged, there are no screw heads showing. I use all stainless steel hardware and waterproof glue. These Adirondack Chairs are very sturdy and built to last. Dimensions – The seat is 22″ wide and 18″ deep. overall dimensions are 34D x 39H x 30 1/2 W

Angelique Chairs

Angelique is a hard wood similar to teak, but harder and more decay resistant. It’s also used in marine construction including boat decking which is how it has become known as Naval Decking. The color is reddish brown gray to reddish- or golden brown. the pictures don’t do them justice, much better looking in person.

Chairs can be left natural or they can be finished. The finish really brings out the grain and the color of the Angelique wood. You can find information from the USDA – Forest service on Angelique wood and a comparison of Angelique to Teak and white oak at https://www.fs.usda.gov/research/treesearch/30495

Western Red Cedar

Made from Kiln Dried 5/4” Western Red Cedar boards making them a full 1” thick. These are very light and easy to move around and at the same time very sturdy. Made with knotty Western Red Cedar. Matching Western Red Cedar side tables are also available.

No matter what wood you choose the design of the chair is the same with a curved back and contoured seat. you will feel the comfort as soon as you sit in them.

Ottoman / Footrest

Ottoman is made with the same sturdy construction as the chairs. All stainless steel hardware and waterproof glue. The screws are countersunk and plugged The Side table can be found here

Pricing

Angelique (marine decking):

$400 – per chair – Natural (Unfinished)

$450 – per chair – Gloss or Matte marine varnish finish

Western Red Cedar Pricing:

$225 – per chair with screws countersunk and plugged, no screwheads showing

$200 – per chair with screws countersunk but not plugged, screwheads showing

Add $50 per chair for Gloss or Matte marine varnish finish

Ottoman:

$60 – Western Red Cedar

$80 – Angeligue

Add $30 per Ottoman for Gloss or Matte marine varnish finish

Adirondack Chair Read More »