Lambs Custom woodworking indoor furnishings and outdoor furniture, made using the finest materials available with the goal of providing products that are going to last for many years.
Cheese & Cracker Tray handcrafted by Lamb’s Custom Woodworking, the cracker tray is made with cherry and can hold 2 sleeves of crackers. The cutting board is an end grain cutting board made with black walnut wood. The cutting board is removable. Dimensions – 12″ x 18″
Cheese & Cracker Tray Read More »
18″ Pizza Peel made in Bridgton Maine by Lamb’s Custom Woodworking – made from black walnut, cherry, and Maple. The paddle overall dimensions are 1/2″ thick 18″ wide x 33″ long. The paddle portion is 18″x18″ The handle has cherry wood in the middle and black walnut on top and bottom. In addition to adding to the aesthetics it makes the handle easier to grip 16″ x 16″ also available
These Custom cabinets were hancrafted in Bridgton Maine to match existing kitchen cabinets, but were made 2″ taller than standard cabinets and without a shelf inside. The large drawers have soft close ball bearing glides.
The top was made from a 28″ wide slab of black walnut cut to length, with a black walnut live edge backsplash.
Large Drawer with Blum full extension, under mount ball bearing, soft close drawer slides.
The cabinet doors have Blum Blumotion soft close hinges
Live Edge Pub table made from reclaimed Jatoba (Brazilian Cherry) crosscut (cookie) with a cast iron base. The top is 40″ x 24″ x 2″ with an overall height of 44″ Any height legs from coffee table to pub table can be used. There are a lot of options in woods available and different shapes. I can provide you with a source you can go look at them and choose the one you like. The top was finished with Rubio Monocoat, which is an environmentally friendly oil / wax finish.
We’ll work with you to design the table you want. You select the slab / cookie and type of table, coffee, pub, dining, and the leg style. We’ll do the rest.
This Crossbow Display Cabinet is made from solid Red Oak, finished with a stain and polyurethane, this case is perfect for storing your crossbow when you’re not using it. The inside has arrow holders for 7 bolts on both sides, for a total of 14 bolts and a drawer for your extra parts. These are made to order, you can specify the type of wood, drawer/door pulls and finishes. Prices will vary depending on the wood selected and if you want plywood used in the build. Overall dimensions are 48″ x 24″ x 14″. The bow compartment is 20″w x 40″ H x 11 1/4″ deep. The drawer is 16 3/4″ x 10 1/2″ x 3 1/2″ with full extension ball-bearing draw glides. All dimensions can be adjusted if your bow doesn’t fit.
The drawer holds your extra parts, broadheads, field tips, wrenches…. The drawer is 16 3/4″ x 10 1/2″ x 3 1/2″ with full extension ball-bearing draw glides. Customize with your choice of drawer and door pulls.
$600 – Red Oak finished with your choice of stain color.
Crossbow Display Cabinet Read More »
Curly Maple bookcase 2′ x 4′ with adjustable shelfs. Made with a combination of cabinet grade Maple plywood for sides, back and shelves. Curly maple was used for the top, face frame, front edge of the shelves and moldings around the top edge. The plywood was used to reduce the cost. The bookcase can be made with curly maple for all parts. It can also be made with any type of wood you want.
Picture of the top of the bookcase, easy to see all the curl in the wood, second picture is custom made moldings from curly maple boards. The shelves are made from 3/4″ maple plywood with a curly maple band added to the front of the shelf and then the front edge was rounded over. The back and sides are also made from 3/4″ Maple plywood
Price varies depending on the size, wood selection and type of materials used, please contact us for an estimate
Cedar Porch Swing is made from 5/4″ thick Western Red Cedar. 5′ wide, its over 4′ wide between the arms, There is room to spare for 2 adults. The contoured seat is 18 1/2″ deep and the back is tilted back slightly providing a comfortable and relaxing position.
Made with Western Red Cedar, assembled using stainless steel screws and waterproof glue. This was finished with a penetrating epoxy and Epifanes, which is a marine grade coating. Chain and ceiling mounting hardware not included. Stainless steel eyebolts attached to the swing for the chain to go through are included.
$390 in natural finish
$100 additional for Marine varnish finish
Western Red Cedar table handcrafted in Bridgton Maine. the legs are constructed using mortise and tenon joinery, and waterproof glue, This cedar table makes a great addition next to your Adirondack chair or between two chairs. Perfect for setting your beverage of choice on or a speaker for playing you favorite music while you relax. Approximately 13″ x 18″ and 21″ tall
Cedar – $50
Anglique – $80
Western Red Cedar planter box. Made from 5/4″ thick boards, so the actual thickness is 1″ not 3/4″. The planter is 40″ tall, making it about waist high. Inside dimensions are 45 1/2″ long, 15 1/2″ wide, 6 1/2″ deep. This was designed so adding a shelf to the bottom is easy. You can add your own or I can add a cedar shelf for an additional $35. Can be customized to any size you want up to 6′ long. Price for a 6′ planter without a shelf is $225.
Decorative corners are added to protect you from sharp corners, increase strength and make the box more appealing
Looking inside you will see the bottom has a small space between the boards for drainage. The tops of the alignment/support blocks are angled so if you hit it with your trowel the trowel will just deflect off and not dig in. The legs are positioned underneath the rails for additional support. The legs are secured with waterproof glue and stainless steel screws. Additional slats going across the bottom increase strength even more There is plenty of support for whatever you put in it.
3′ long – $150
4′ long – $175
5′ or 6′ long – $225
Shelf for bottom – $35
These Adirondack chairs are handcrafted in Bridgton Maine using Western Red Cedar or Angelique wood. The curved back and contoured seat make them incredibly comfortable, and they are at a height that’s easy to get in and out of. All boards are sanded before assembly, providing a clean and smooth product ready for your finish. Joints are glued and screwed together. Screws are counter sunk and plugged, there are no screw heads showing. I use all stainless steel hardware and waterproof glue. These Adirondack Chairs are very sturdy and built to last. Dimensions – The seat is 22″ wide and 18″ deep. overall dimensions are 34D x 39H x 30 1/2 W
Angelique is a hard wood similar to teak, but harder and more decay resistant. It’s also used in marine construction including boat decking which is how it has become known as Naval Decking. The color is reddish brown gray to reddish- or golden brown. the pictures don’t do them justice, much better looking in person.
Chairs can be left natural or they can be finished. The finish really brings out the grain and the color of the Angelique wood. You can find information from the USDA – Forest service on Angelique wood and a comparison of Angelique to Teak and white oak at https://www.fs.usda.gov/research/treesearch/30495
Made from Kiln Dried 5/4” Western Red Cedar boards making them a full 1” thick. These are very light and easy to move around and at the same time very sturdy. Made with knotty Western Red Cedar. Matching Western Red Cedar side tables are also available.
No matter what wood you choose the design of the chair is the same with a curved back and contoured seat. you will feel the comfort as soon as you sit in them.
Ottoman is made with the same sturdy construction as the chairs. All stainless steel hardware and waterproof glue. The screws are countersunk and plugged The Side table can be found here
Angelique (marine decking):
$400 – per chair – Natural (Unfinished)
$450 – per chair – Gloss or Matte marine varnish finish
Western Red Cedar Pricing:
$225 – per chair with screws countersunk and plugged, no screwheads showing
$200 – per chair with screws countersunk but not plugged, screwheads showing
Add $50 per chair for Gloss or Matte marine varnish finish
Ottoman:
$60 – Western Red Cedar
$80 – Angeligue
Add $30 per Ottoman for Gloss or Matte marine varnish finish
